We are moving from 2610 Software (C2600-IS3X-M), Version 12.3(17a) to --> 2911 15.0(1)M5 Software (C2900-UNIVERSALK9-M) version 12.3(17a)In the old config I have: 'proxy h323' global commandBut I can't find it on the new router. Isn't it supported...
Hello,IronPort is sending this Warning message:A RAID-event has occurred:RAID disk 1: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND> LBA=0Version: 7.0.3-005What could be the cause of such warning? ThanksPatrick Y.
Since there is no VPN Client for MAC OS 64 bit, we are trying to use the built-in VPN Client that natively comes with the MAC OS Lion 10.7.1 (64 bit).Unfortunately the connection cannot be established successfully (Note that the connection can be est...
Client computers have ESET Smart Security with firewall enabled and NAC agent installed and controlled, previously there were no problem with both systems working together. The problem appeared suddenly and caused users to have disconnection in the n...
Hello Tarik,Thanks for the info.The clients are able to login. And in the ESET Smart Security configuration, the nac client application is added to the firewall rules which make nac active whatever the ports is used by the client.Thanks Patrick Y.