Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dears,
We've VPCs configured in ACI with L3Outs/L2Outs on and facing issue that some type of traffic after single link failure in VPC has dropped. like ping/trace is working but SSH or HTTP is not working and after to fix the passive issue all kind...
Dears,We have Multi-Tenant design, I want to introduce Cisco FTD to control Inter-Tenant/External communication.Please I need to understand the below 2 approaches.1- Single shared L3Out to Cisco FTD.2- Each Tenant separate L3Out to Cisco FTD (Separa...
Dears,I've configured VRF-Lite on RY with BGP Route leaking.BGP AS number on RX, RY & RZ are same.I'm trying to advertised routes of RZ to RX.RY have multiple VRF:VRF A: towards RZVRF B: towards LAN (Firewall)VRF C: towards RX Route leak between VRF ...
Dear,I've ASR1006-X configured with Multiple VRFs on same physical links, also MP-BGP for some VRF leaking, please i need support that how to configure BFD with BGP neighbor.I tried to configure on interface (Physical & Sub-Interface) but BFD command...
Hi Paul, Thanks for your suggestions,VRF leakage between VRFs are fine routes are available, as per requirements. but my requirement is that VRF A route 10.1.1.1 should be available in VRF B to apply firewall policies and do natting, then it has to b...
before i tried without these commands but no impact.module lights are off & cisco logo is there.Neither speedial name nor number is appearing on the screen.c2900-universalk9-mz.SPA.151-4.M2.bin (CCME 8.6)
Dear,Thanks for your reply, I can't change the extension. This extension is necessary.How can I modify any other option as you mentioned,1- uncheck "dial extension anytime"2- change dial-by-extension digit (I don't understand)waiting for your reply.r...
