Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can anybody tell me what the best practice is in regards to device setup in ACS?Specifically, is it better to specify each device individually or is it ok to allow whole subnets access to access, therefore allowing all devices in those subnets access...
I am having an interesting routing issue.I have 4 ASA 5520 firewalls. The inside interface for each ASA is on 192.168.1.x/24. FW1 has .1 FW2 has.2 and so on.FW4 is setup to provide VPN access into this 192.168.1.x/24 network. There are many servers i...
Folks,I have an asa5520 runing 9.0 that I want to setup for simple NAT, i,e 4.3.2.1/30 on the outside 192.168.1.1/24 on the inside with dynamic NAT outbound. The new IOS has thrown me for a loop.. I have everything working except the NAT. Can somebod...
All the other 3 firewall now have the static route.. I am still dead in the water..Its interesting to note that my VPN client will get 192.168.2.2 every time and when I am at the cli on say FW1, I cant ping 192.168.2.2, but I can ping 192.168.1.4Whe...
