Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
Looking at an Expressway C and E deployment for MRA and SIP support and possibly B2B. Was wondering about the pros and cons about using the same cluster name for the ExpC cluster and the ExpE cluster. Also wanted to confirm best practice on th...
Hello,I have an existing Unity Connection 8.6 integration working with Exchange 2010 for single inbox and such. Things are working fine.I have built a new Unity Connection 9x cluster and plan to use COBRAS to migrate data but need to build the Exchan...
Hello,All the documenation on fax support on the VG224 talks about using MGCP for standards based T38 support.So does that mean that it uses protocol based T38 switchover?In looking at the VG224 MGCP GW config on call manager it doesnt show much othe...
Hello,So under the SIP trunk configuration - Call Routing Information - In CUCM, the "Remote-Party-Id" and "Asserted-Identity" check boxes are both checked and the "Asserted-Type" is set to "Default".However after looking thru enterprise parameters a...
Hello,Seems like most people these days are using flash as the location of their CME phone firmware, config files, GUI, rintones, etc.However if you dont need to do locals per phone or phone type, what are the benefits of using flash: versus system: ...
Hi Kevin,
Thanks for the feedback.
So part of the process on the CER to PSAP call flow is CER forwarding the call back to CUCM. Does CER use a CTI Route Point to forward the call back to CUCM? CER has to use something similar to how it uses CTI ports...
Hi Kevin,
This is a very nice description of the CER CUCM process.
One question though on the process of the call from CER back to CUCM after the calling number has been modified. What is being used to make the call from CER back to the CUCM route p...
Hi Alexthanks for the responseSorry it took me a while to respond. I am having issues with the new site. I couldn't view this discussion from the new cisco site. I can only get to it by clicking on the email link.I have looked at that link quite a f...
Thanks for the replyBelow is Cisco's recommended CUCM setting on the SIP trunk if you want to use p-asserted-identity. Under the Asserted-Type you have the choice of PAI, PPI, and Default. Do you know what CUCM uses if you select "Default" for assert...
