Hi All. We have a situation wherein we need to block CLID for all outbound calls globally, except for when the called party matches a certain range of numbers. We are located in Australia. Is this possible? How would we achieve this? Thanks in advanc...
We have an in-depth internal penetration testing under way at the moment and it is becoming clear that our Firepower for ASA sensors are not blocking traffic sourced from IPs within the $HOME_NET range.
We have a Trend Micro DDI probe at each of ou...
We're running CUCM 10.5.2 and recently deployed 8811 series phones.
Since this time, DTMF does not appear to be working, either internally with our IPFX IVR (+voicemail), or when interacting with external IVRs.
The topology is as below:-
Outb...
Hi All. I'm attempting to set up the Nexus 1000v switch, version 5.2.1.SV3.1.3.I've installed the VSM and VEM components.I cannot upload the new plug-in via the vsphere native client - the option is greyed-out, as per attachment.I have two esxi hosts...
Hi All. We've deployed a pair of Nexus 5596UP switches at our HQ site and I'm trying to get ERSPAN to work.My understanding is that ERSPAN is simply a SPAN session encapsulated in GRE?We are running Wildpackets Omnipeek as our sniffer - is there a wa...
Regarding our environment:- - CUCM 11.5(1)(SU7) - 3945s on 156-3.M2, E1s (ISDN) for voice services, configured as SIP trunks in CUCM. - Calls made from 7924, 8811 series handsets, Jabber, etc, outbound to the PSTN via aforementioned 3945s. Please adv...
Hi Craig. It's been a while since your last post, however I'm hoping you can help us.
We have a scenario where we'd like to authenticate end user devices using machine based certificates. This is working fine on the ASA side - end user devices with v...
We have four gateways - here's the configuration from one of them.
Incoming calls will match the voip dial peers - we have an IVR that uses CTI ports to communicate with CUCM - CTIQBE protocol. All inbound calls work with our internal IVR, in terms o...
OK. I've managed to use the vSphere client to attach to the vCenter host and then I can install the plug-in - too bad it doesn't work either. I'll log a new question.Cheers.
