Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,MY "router" is a 4506! Off that I have 20 CISCO Switches, from 3560 to 2924's. I am looking for Software to give me a visual trunk to port bandwidth snapshot to see where we are across our humble network.Also something to map(gui for printi...
I am on a switch WS-3548-XL-EN and Software version 12.0(5.3)WC(1).#show int vlan 14: VLAN14 is deleted, line protocol is down. #show ip int vlan 14: VLAN14 is deleted, line protocol is down#vlan data,show: VLAN ISL Id:14Name: VLAN0014Media Type: Eth...
We want to do some testing with NAT and Multicast Tunneling. I have Already suggested the 2801. My boss says, what is the smallest series with 2 SPFs that will do NAT and Multi cast tunneling?Please advise.Mike
We have a CISCO 4006, 5 Cat 3548s' and 3 2924s'. I like the Graphics of ConfigMaker, and quickley noticed I can't use it for the Router and switches I have...What can I use in place of Configmaker??
Thank we mployed this on the 4506, we are now down to 10 to 17% !It was very hard intially to find the source of the problem. I wished I had some software to alert me. As it happened someone remembered complaint from a particular server from months a...
For the past two weeks we had the case where, a server was broadcasting UDPs We just found the source problem) and our CAT4506 was pegged at 95% (show processes CPU) Cat4k Mgmt LoPri was 85.29% ! The SysAdmmin says we need to close or filter UDP Des...
Amit,after studying both links, I am not sure you got my question.I have a 6 port, ws-x4306-gb1000base-x the part number and photo is listed in the first link. So I am wondering if the entire daughter board itself will form fit into the 6500 chassis...
Thanks for the info, I am curently looking at Whatsup gold 11, I have very little profesioanl experience with any think but Cisco Network Assistant, For network mapping it only goes 1 deep unless I missed something. And you are right it is a good sta...
