Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a centralized voicemail system with 10 digit mailboxes for scalability. However users at our largest site would like to be able to forward messages by the last four digits. We don't want to use alternate extensions or partition the system. An...
Is it possible to setup the ACS 5.x appliances to use two interfaces? I would like to have an ACS server with a NIC on a production network and also another NIC on an out-of-band management network. Looking at the CLI configuration guide it appears t...
I am having difficulty getting 10 digit dialing and 7 digit dialing to work at the same time on CME.If I have a dial-peer with a 10 digit pattern:destination-pattern 9206.......and another dial-peer with a 7 digit pattern:destination-pattern 9..........
I am using a gatekeeper to manage call admission control between CCM and CME. I have a Call Manager cluster in one zone and CME in another. I am limiting the interzone bandwidth for the CME zone, no limit on the CCM zone. Calls from CME phones seem t...
Yes, I have thought of that, but end users complain about not having enough time to enter numbers. I was hoping that there was an elegant way of overcoming this with a translation pattern or something.ThanksNathan
Here is what I am observing for calls from CCM phones to CME phones (the codecs everywhere are g.729):Prior to any calls:Gatekeeper01#sho gatekeeper zone stat GATEKEEPER ZONES ================GK name ...
