Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The purpose of this document is to provide the information necessary to carry out the fabricpath design and implementation and testing in an enterprise environment. The main focus for this document is to provide a tested result of Classical ethernet ...
The below is a good documentation on the VIC connectivity options
http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-c-series-rack-servers/117637-technote-UCS-00.html
Muhammed M | NCE | CCIEData Center PDI Technical Advisorhttp...
Hi,
The carmelusd process will reprogram the carmel ASIC component in the switch whenver a change in network occurs like new ARP entry, host going offline etc.
I would recommend to watch the logs and monitor a period of time to isolate the issue.
...
Hi Rajib,
I do not yet find a documentaiton with with LTM and GTM, considering these are F5 solution I guess from cisco side you should consider these are lik load balancers and Global site selectors.
There are good documentaiton of active-activie d...
The CVR-QSFP is not yet supported on F3 card as per the below information.
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/40GE_Tx_Matrix.html
And the DWDM even though it is mention on the release not...
You can have OTV between the DC to extend layer 2 between them. ANd also can make use of the HSRP localization.
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/white_paper_c11-644634.html
Muhammed M | NCE | CCI...
