Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just curious if anybody has an idea what course of action I have in regards to the 7965 phones which have component issues which cause them to fail after a power cycle. I have reached out to our local Cisco rep with no luck. Also the phones are not...
Not sure if this is the right group to ask this question, but figured it was the best fit. I need to extend our current LAN to a guard shack to provide VoIP and data connections. Running a physical cable would be cost prohibitive, I think, as it h...
Working with Silent Knight SK-5104 fire alarm dialer and need to configure the VG202 to support Contact ID format. Anybody had to deal with this and how did you over come the issue.
Is anybody using FuelMaster with a VG202. FuelMaster is a fleet fueling system which uses a modem for communication back to FuelMaster. Per FuelMaster this requires an analog phone line. Tried to use the VG202, but they say they can not connect. ...
I have some modem devices I am trying to connect using VG202's that require a minimum ringing voltage of 48v. How can I boost the ring voltage on the VG202, either through the config or adding a ring voltage booster. Has anybody had to do this, I w...
I am running into a similar situation. Chassis 1 is connected to FI A ports 3 and 4 via IOM A. Both of these ports are showing CRC errors. Chassis 1 connected to FI B ports 3 and 4 via IOM B do not have any CRC errors. After some testing I think ...
Guess I forgot to add, I have a switch in the guard shack. Not necessarily wanting to extend the wireless networks, but I do want to extend a wired network to the guard shack.
