Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I had a question regarding IOS version (ISR1 and 2’s)… We will be adding memory to our current ISR1’s, to support 15.x as we move to CUCM 8.6. getting the ISR1’s on 15 will extend the life on them until we are able to replace them with ISR2’s in th...
We continue to have random WAV files disappear.Ran DBWalker and found the following error,1218:(error) greeting is set to use a missing WAV file path:D:\CommServer\Stream Files\ConPlantMainAutoAttendant_Standard_MrGreeting_0ca980e3.wav How do we proa...
I have the following:ACS 4.11200 AP 12.3(8)JEA1Windows XP SP2 with WPA2 update.My AP is set to authenticate to ACS for EAP requests, my ACS is setup to allow PEAP, and my client is using PEAP. When my AP does not have "authentication key-management w...
Everything went well except for one thing, when I try and launch ciscoview for a given node from the map, iexplore opens with a 403 forbidden message for the following URL:http://ciscoworks-pr01:1741/CSCOnm/servlet/com.cisco.nm.cvw.servlet.CvServlet?...
Verify in the controller wireless tab then click on the radio's - 802.11a/n and b/g/n on the left side then click network. Make sure the network staus is enabled in the controller. Because even you unshut the radios from the AP, once the AP reboots i...
Thanks, both GP and Chris...Yea, i have seen that doc, its not updated when IOS versions are 'fixed' or maintained.looks like 15.1(4)M3 is a good fit for ISR2... and M2 for ISR1 (today)
using debug dot11 station conn failures i get:Apr 4 13:24:02.218 EST: Client 000c.f144.48b2 failed: WPAIE not found and requiredApr 4 13:24:19.549 EST: Client 0019.7d52.bd57 failed: Timeout waiting for client EAP auth responseApr 4 13:24:19.549 ES...
