Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Helloi have ASA5510 and configured for VPN remote access. the connection is established and users are authenticated correctly and logged into the local network and can ping all LAN devices.The Problem is that, the logged in users cannot ping any othe...
hello i have 2951 CME router with cme V.8.4 and IOS "flash0:c2900-universalk9-mz.SPA.151-4.M4.bin. the system works fine with internal calls but when makes and external call using FXO the CME user could not hear the called or calling party( the othe ...
hello i have a problem with 1552E to register with 5508 WLC, and always got "AAA authentication error” in the WLC log, while AAA is not enabled. so my question is , do i need to add the MAC address to the WLC MAC filter list even if i not enable the...
in the ASA specs there is number of users ( in the ASA5505 = 10), what these users indicates, is it the total users can login to the ASA at the same time? plz help
by thw way, i have VLANs confgiured and no WLAN, just two wired netwroks connect using 1552E brigde..the WLC in a network spearted by a router from the 1552 bridges, and i will have 5 RAPs each connects differnt MAPsi have captured a part of the requ...
i guess the problem as scott fella said, because i am using PoE switch ( 3560G - PoE) and still waiting for the Power injector ..I’ll try to find a testing power injector, and will let you know once done..
Hello EvaldasOuThanks for advice i already try it but as this is my first time with WLC, i am trying to understand general concepts.Anyway, i already configured the system and AP joined the WLC and it looks fine, but..... the radio interface always ...
