Hi,
I have a Nexus Switch with WAN Links in different VRFs and corresponding LANs in respective VRF.
I need to configure a ERSPAN with one of the WAN links as source and ERSPAN destination connected to same switch.
My ERSPAN config on switch is as ...
Hi,
CSCvd65778 bug is listed under NX-OS 7.1(4)N1(1) which states that Unable to create new SVI when role on box is network-operator.
Symptom:We cannot create SVI using TACACS user. Conditions:Using TACACS user is not able to modify or create SVI. U...
I have an ASR 1006-X router MGMT interface connected to another router. Can I establish BGP/OSPF neighborship between ASR and other router over ASR MGMT Interface.
ASR 1006-X MGMT Interface <------...
Hi,I have ACE 4710. My users will be accessing websitewww.fcc.com which is mapped to VIP in DNS.My requirement is that when users access www.fcc.com then ACE should redirect the URL to the following onesDear Team, Kindly create an new w...
Hi,I have pair of 5596 switches in vPC. One host say "HOST A" is connected to the primary vPC peer and other "HOST B" on secondary vPC peer.Both are in same VLAN 10. Both hosts are vpc orphan ports as their NIC is configured in active/standby mode.I ...
Hey Mark,
I am anyways going to assign IP address to the Interface and then using VRF leaking from Global to MGMT VRF on ASR, I would propagate few prefixes on to my NOC router over BGP neighbourship between them.
As per supported features over mana...
Hi Mark,
Thanks for the reply.
Over MGMT interface, I would just need few BGP prefixes for monitoring purpose to be advertised to my NOC router say 1921.
Real production traffic is not going to be routed over this MGMT interface.
Thanks Kanwal for a excellent solution ..But is it mandatory that I should keep the redirect URL on 9001.Probably I will change the URL to 80 itself and then new VIP translating from 80 to 9001.
Hi Kanwal,I got that URL copied as it is with ? included as per you suggestion. Then I came to know that ACE cannot redirect to two different URLs so I changed it only one URL.Old Config :Earlier there were two URLs with two redirect servers.rserver ...
