Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've one SSID used for both Head Office users and branch users. The problem is that branch users are using flexconnect. All the branch users are using vlan 10 as pre authC and vlan 20 after authenctication. But H.O. users are using vlan 50 to connect...
I've ISE v1.1.2.145 and Cat 6500 IOS ADVENTERPRISEK9-M, Version 15.0(1)SY2I'm trying to add 6500 in the trustsec group with ISE and followed the trustsec 2.1 documentation. After configuring it keeps on giving me error in the ISE logs below with the ...
I've an ISE deployment of two nodes. I generated a CSR, self signed it and bind it in the ISE. It was working fine. Now when i wanted to change the certificate with a new authority. I took the same CSR and signed it with different authority. But afte...
Is there a proper hands-on training course for Prime NCS?What i find is general overviews of NCS in different courses. Looking for NCS specific.Thanks,Zohaib
Hi Jan,Thanks for the reply. I just want to know if there is any other way to identify the users in the policy since im using only default group and the network in operational. Shifting these AP to a new group will be difficult. Is there a way to put...
The issue was resolved after i install certificates signed by new CA server and restart both the boxes. After the restart every thing came to normal with only one certificate selected for EAP and HTTPS authentications.I guess some internal process wa...
I've already opened a TAC case and the engineer said every thing is configured fine. Will send some debugs to them. I'll update here once the case is solved.Thanks for your help.Regards,Zohaib
@bikespaceI checked all the locations in primary and secondary node but couldn't find the old one. After i deleted the old one, i did stop, start the ise app but same problem.@NenoThat's what i did in the start, i didn't delete the old one, just over...
