Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have spent a lot of time researching Cisco documentation and cannot find this answer. Does Cisco Unity Express work with Office 365? Details: I have a cisco 2851 and cue ver7.0. Voicemail to email worked fine when they were local exchange. Now the...
We have a Cisco 6500 that we can login to with Priv level 0 but we cannot login to enable mode (Priv level 15). User Access VerificationUsername: xxxxxPassword:6500Mothership>enPassword:% Access denied6500Mothership>The Cisco ACS server that it commu...
I would like to change the hostname of two FirePower 4100 systems which are in HA active/passive mode between the two systems on the installed ASA 9.7 code.
The ASA hostname was changed just fine.
When I try to change the FirePower chassis hostname v...
I'm not sure how to program this because all examples on Cisco use an extension number for the pilot number. I need to use a DID #.
The goal is for any call to 414-555-5555 to go to all extensions in the building. 414-555-5555 has no extension asso...
Looking for your thoughts or if you have experienced this before. When we enable RSPAN with ACL filtering on a 6500 or 3560 switch, certain segments of our network lose connectivity. This is true for both Chassis types.
The programming we are using...
That's what I thought when I started to troubleshoot it but the customer assures me that there is no possible way for it to learn of that mac off of gig 0/20.
That being said, I will have to likely visit onsite to verify as the answers I've received...
A follow up to this excellent answer: There is one other option you can use. You can purchase a different type of power supply for the 6500 that will allow you to plug it into a standard home outlet. Please continue to read as there is something y...
Thank you for your response. The quick220.com site was very helpful and I believe it's the answer to my issue. I would have never found that without your help. Thank you!
Here's an update. We cannot ping any device on that subnet unless that device is rebooted. Then, we can reach it. So, not only can we not telnet to the primary IP on the interface, we cannot ICMP ping to the devices on that subnet unless they are ...
