Good day! I have a branch office set up with a cable modem and an ASA 5505 as an easyvpn hardware client with network extension mode enabled, and connects to a PIX515E at the headend. I'm working on a separate issue for why the Internet connection drops periodically at the site, but my main problem is as follows. In this location, I have an 1142 LAP.  It can boot up, and join the WLC just fine.  Performance seems a little slow when it's working, but it works.  The real issue is, if the VPN connection drops and reestablishes for any reason, the wireless clients all cease being able to communicate.  All wired clients seem to bounce back without a problem. The access point still shows to be joined to the controller, the access point never goes down, just wireless clients can't access anything any more.  If I reload the access point, clients reassociate and continue on their merry way.  For now, I am experimenting to keep the connection from dropping, but I'd really like to get it where I don't have to babysit this thing all day and night, and it can rejoin and function normally by itself after an outage. We are changing to this configuration from wireless bridging due to interference and reliability issues - however, I never experienced any similar issues with this particular access point before, so it's not the access point itself. I'm hoping somebody out there has an idea or suggestion for something to try or look for.  Thanks for any help. ... View more