Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,during the resolution of an breakdown I have noticed that the commands "ip classless" and "ip subnet-zero" are not more visualize to you in the configuration, not even with show running-config full.The IOS version is Entbase12.4(5).Someone knows i...
The document CISCO "Configuring Frame Relay Traffic Shaping" [doc ID. 6151] said:Tc = BC/CIRSo if I have configured:CIR= 256000BC = 32000Tc = 0.125 Why if I have configured:CIR= 768000BC = 96000Tc = 0.125 .... but the output is : 0.063 ??? See the ex...
Hi Peter,Is there some document that indicates "that when redistributing specifically static or connected routes, the seed metric is not necessary as it will be derived from the EIGRP metrics of the egress interface of the redistributed route"?Thanks...
I have a 2800 series router and the linerate is 1984 Kbps.The router can support up to 120,000 pps with CEF enable, but I can see that "Total output drops" increments when the "output pps" is around 350 pps and "output rate" is more below the linerat...
