Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About xh_liu
06-19-2019
Stats
Member since
04-04-2001
30
Posts
0
Helpful
0
Solutions
Created by
xh_liu
in Application Centric Infrastructure
in Application Centric Infrastructure
01-09-2019
07:33 PM
01-09-2019
07:33 PM
thank you. I had checked the syslog message, I just don't know how to do next step.
I want to know if these version is ok.
any suggestion based on these syslog message is appreciated.
F1081 - fltVnsRsALDevToDomPResolveFail Syslog Message %LOG_LOCAL0-4-SYSTEM_MSG [F1081][resolution-failed][warning][DN of affected MO] Failed to form relation to MO [tDn] of class [tCl] Explanation The object refers to an object that was not found. Recommended Action Make sure that referenced object exists and the name is spelled correctly in the relation object. F0764 - fltVnsALDevConfMismatch Syslog Message %LOG_LOCAL0-3-SYSTEM_MSG [F0764][configuration-failed][minor][DN of affected MO] L4-L7 Devices configuration [name] for tenant [name] is invalid. Explanation This fault occurs when a logical device is being configured in a way which is not compatible with the meta device information supplied by the device package. Recommended Action If you see this fault, please modify LDev configuration to resolve cause of fault.
... View more
Created by
xh_liu
in Application Centric Infrastructure
in Application Centric Infrastructure
01-09-2019
02:17 AM
01-09-2019
02:17 AM
I want to test service graph use APIC 2.2（3j）, I use asav device package (asa-device-pkg-1.2.9.18.zip) and asav version 9.6(4).
After I creat the device under my tenant, the device state is Stable, but there are fault messages, error code is F1081 and F0764.
any help or suggestion is appreciated, thank you!
... View more
Labels:
Created by
xh_liu
in Application Centric Infrastructure
in Application Centric Infrastructure
11-18-2018
07:01 PM
11-18-2018
07:01 PM
So I understand that I need one vlan pool for VMM domain, which include a static entry range; and another vlan pool for L3 domain. The two polls should have same static vlan used for l3out. I will try it soon. but why I need to create the EPG you write in your reply?
... View more
Created by
xh_liu
in Application Centric Infrastructure
in Application Centric Infrastructure
11-18-2018
02:26 AM
11-18-2018
02:26 AM
My question is:
The ACI integrates with vCenter.
I want to use a vm as a external router(eve-ng）.
I don't know if I can use same ACI interface which connect to VMware Hypervisor for L3 out interface config?
If it work, how to implement it ?
Thank a lot!
... View more
Labels:
01-30-2018
06:39 PM
Yes, I have noticed the 2900 router, but ' Cisco announces the end-of-sale and end-of-life dates for the Cisco 2900 Series Integrated Services Routers. The last day to order the affected product(s) is December 9, 2017. '
So is there any other option??
... View more
01-28-2018
08:07 PM
My customer have some DLSW config on a Cisco 2811 router, but now Cisco 2811 router is EOS and EOL，it means the product can't get any support service now.
My customer don't want to change original DLSW config in futrure new device.
So I try to find a new Cisco device which can support DLSW and replace the old Cisco 2811.
But I didn't find a suitable such device.
Who can give me any suggestion about the question?
Thank you!
... View more
Labels:
10-12-2017
07:16 PM
To make it more clear:
In my lab,
dns server: two router configed as dns server, r2 (w/ ip 192.168.100.2) and r3 (w/ ip 192.168.100.3, 192.168.34.3) dns client: one router confied as dns client, r4(w/ ip 192.168.34.4)
I hope r3 is coniged as dns server and I don't want to config r2 as r3's dns server by using command 'ip name-server 192.168.100.2'. But I till hope r3 can forward 'baoshan.com' dns query to r2 by using command 'ip host baoshan.com ns ns2.baoshan.com'. My question is that r3 didn't forward the dns query to r2. here is more config: r2: r2#sh run | include dns|host int e0/0 ip add 192.168.100.2 ! hostname r2 ip host test.baoshan.com 44.44.44.44 ip host ns2.baoshan.com 192.168.100.2 ip host baoshan.com ns ns2.baoshan.com ip dns server ip dns primary baoshan.com soa ns2.baoshan.com mx2.baoshan.com ! router ospf 1 network 0.0.0.0 255.255.255.255 area 0 ! R3: ! ip host ns2.baoshan.com 192.168.100.2 ip dns server ip host baoshan.com ns ns2.baoshan.com (I hope r3 should forward 'baoshan' dns query to ns2 which is r2 dns server) (followed command although I think is not needed, but I have tried these command and failed) ip dns primary baoshan.com soa ns2.baoshan.com mx2.baoshan.com ! int e0/0 ip add 192.168.100.3 255.255.255.0 ! int e0/1 ip add 192.168.34.3 255.255.255.0 ! router ospf 1 network 0.0.0.0 255.255.255.255 area 0 ! router r4: ! ip domain-lookup (default) ip name-server 192.168.34.3 ! int e0/0 ip add 192.168.34.4 255.255.255.0 ! router ospf 1 network 0.0.0.0 255.255.255.255 area 0 !
... View more
10-12-2017
05:46 PM
I just want to check how NS record work.
I want to know how to check it.
Here is the command explaination:
ip host domain-name ns server-name
Example: Device(config)# ip host example.com ns ns1.example.com (Optional) Configures the device to create an name server (NS) resource record to be returned when the DNS server is queried for the associated domain. This configuration is needed only if the zone for which the system is authoritative will also be served by other name servers
... View more
10-11-2017
04:35 PM
No, it didn't work.
after I change config as what you say,
r3 config:
ip host baoshan.com ns ns2.baoshan.com ip host ns2.baoshan.com 192.168.100.2
ip dns server ip dns primary baoshan.com soa ns2.baoshan.com mb2.baoshan.com
Here is r3 output:
*Oct 11 23:31:19.362: DNS: Incoming UDP query (id#19342) *Oct 11 23:31:19.362: DNS: Type 1 DNS query (id#19342) for host 'test.baoshan.com' from 192.168.34.4(56837) *Oct 11 23:31:19.362: DNS: Servicing request using view default *Oct 11 23:31:19.362: search_nametype_index: test.baoshan.com *Oct 11 23:31:19.362: search_nametype_index: test.baoshan.com *Oct 11 23:31:19.362: search_nametype_index: baoshan.com *Oct 11 23:31:19.362: search_nametype_index: test.baoshan.com *Oct 11 23:31:19.362: search_nametype_index: test.baoshan.com *Oct 11 23:31:19.362: search_nametype_index: test.baoshan.com *Oct 11 23:31:19.362: search_nametype_index: baoshan.com r3# *Oct 11 23:31:19.362: search_nametype_index: test.baoshan.com *Oct 11 23:31:19.362: DNS: Replying NO_SUCH_HOST to query (id#19342) with baoshan.com SOA *Oct 11 23:31:19.362: DNS: Finished processing query (id#19342) in 0.000 secs *Oct 11 23:31:19.362: DNS: Sending response to 192.168.34.4/56837, len 111
... View more
10-11-2017
04:12 PM
The config in the web is simple and not telll how to make 'dns ns' config work. Thanks.
... View more
10-11-2017
08:39 AM
Here is my config:
r3:
(dns server)
ip dns server
ip domain lookup
ip host baoshan.com ns ns2 ip host ns2 192.168.100.2
!
r4:
(dns client)
ip domain lookup
ip name-server 192.168.34.3 ( which is r3 ip address)
!
r4: ping test.baoshan.com
r3 didn't forward dns query to ns2 based on the "ip dns baoshan.com ns ns2" config, r3 at last sent out broadcast dns query. I want to know why and how to make dns ns config work?
Followed is r3's debug domain output:
*Oct 11 15:27:22.841: DNS: Incoming UDP query (id#57629) *Oct 11 15:27:22.841: DNS: Type 1 DNS query (id#57629) for host 'test.baoshan.com' from 192.168.34.4(57391) *Oct 11 15:27:22.841: DNS: Servicing request using view default *Oct 11 15:27:22.841: search_nametype_index: test.baoshan.com *Oct 11 15:27:22.841: search_nametype_index: test.baoshan.com *Oct 11 15:27:22.841: search_nametype_index: baoshan.com *Oct 11 15:27:22.841: search_nametype_index: baoshan.com *Oct 11 15:27:22.841: search_nametype_index: test.baoshan.com *Oct 11 15:27:22.841: search_nametype_index: test.baoshan.com *Oct 11 15:27:22.841: search_nametype_index: test.baoshan.com r3# *Oct 11 15:27:22.841: search_nametype_index: baoshan.com *Oct 11 15:27:22.841: search_nametype_index: baoshan.com *Oct 11 15:27:22.841: DNS: Re-sending DNS query (type 1, id#63900) to 255.255.255.255 *Oct 11 15:27:22.843: DNS: Incoming UDP query (id#63900) *Oct 11 15:27:22.843: DNS: Type 1 response (id#63900) for host <test.baoshan.com> from 192.168.100.2(53) *Oct 11 15:27:22.843: DNS: Response code 3 (id#63900) from 192.168.100.2(53) *Oct 11 15:27:22.843: DNS: Finished processing query (id#57629) in 0.002 secs *Oct 11 15:27:22.843: DNS: Forwarding back reply to 192.168.34.4/57391
,
... View more
Labels:
Created by
xh_liu
in XR OS and Platforms
in XR OS and Platforms
02-27-2017
07:30 AM
02-27-2017
07:30 AM
I use gns3 to do some lab, I install IOS XRv 9k(iosxrv-demo-6.1.2.ova), but the os can't support 'interface nve' command, so I can't do vxlan lab. anyone can help me?
RP/0/0/CPU0:xr1# RP/0/0/CPU0:xr1# RP/0/0/CPU0:xr1#conf t Mon Feb 27 15:28:08.624 UTC RP/0/0/CPU0:xr1(config)#int nve 1 ^ % Invalid input detected at '^' marker. RP/0/0/CPU0:xr1(config)#
... View more
- Tags:
- xrv vxlan
Labels:
Created by
xh_liu
in Other Data Center Subjects
in Other Data Center Subjects
09-04-2014
03:38 AM
09-04-2014
03:38 AM
this time we do otv test. we found when internal interface fail(eg.interface down), it neet 10-15s for AED switch to another AED. 10-15s is too long for data center application. so my question is: 10-15s is normal convergence time when internal interface down？
... View more
Labels:
Created by
xh_liu
in Network Management
in Network Management
05-15-2013
02:13 AM
05-15-2013
02:13 AM
1/ here we use nexus 5k, nx-os, so may be command is little different. 2/ nx-os snmpv3 config may be modified as： snmp-server user admin network-admin auth md5 xxxx priv zzzzz snmp-server host 10.88.32.200 traps version 3 public udp-port 1163 ( it seems only traps version need be modified from 2c to 3) 3/ by the way, it seems original snmp config is added by dcnm during install dcnm software. 4/ verify snmpv3 work is a good method,we will try it first. thanks.
... View more
Created by
xh_liu
in Network Management
in Network Management
05-14-2013
05:35 AM
05-14-2013
05:35 AM
can you put your snmpv3 config here, so I can confirm if I do right snmp config. thanks my snmp config is : snmp-server user admin network-admin auth md5 0xc8b4b726e3bea5362f172f244fa45313 priv 0xc8b4b726e3bea5362f172f244fa45313 localizedkey snmp-server host 10.88.32.200 traps version 2c public udp-port 1163
... View more
Created by
xh_liu
in Application Centric Infrastructure
01-09-2019
01-09-2019
thank you. I had checked the syslog message, I just don't know how to do
next step. I want to know i...
Created by
xh_liu
in Application Centric Infrastructure
01-09-2019
01-09-2019
I want to test service graph use APIC 2.2（3j）, I use asav device package
(asa-device-pkg-1.2.9.18.zi...
11-18-2018
So I understand that I need one vlan pool for VMM domain, which include
a static entry range; and an...
11-18-2018
My question is: The ACI integrates with vCenter. I want to use a vm as a
external router(eve-ng）. I ...
01-30-2018
Yes, I have noticed the 2900 router, but 'Cisco announces the
end-of-sale and end-of-life dates for ...
01-28-2018
My customer have some DLSW config on a Cisco 2811 router, but now Cisco
2811 router is EOS and EOL，i...
10-12-2017
To make it more clear: In my lab, dns server: two router configed as dns
server, r2 (w/ ip 192.168.1...
10-12-2017
I just want to check how NS record work. I want to know how to check it.
Here is the command explain...
10-11-2017
No, it didn't work. after I change config as what you say, r3 config: ip
host baoshan.com ns ns2.bao...
10-11-2017
Here is my config: r3: (dns server) ip dns server ip domain lookup ip
host baoshan.com ns ns2ip host...
Created by
xh_liu
in XR OS and Platforms
02-27-2017
02-27-2017
I use gns3 to do some lab, I install IOS XRv 9k(iosxrv-demo-6.1.2.ova),
but the os can't support 'in...
Created by
xh_liu
in Other Data Center Subjects
09-04-2014
09-04-2014
this time we do otv test.we found when internal interface
fail(eg.interface down), it neet 10-15s fo...
Created by
xh_liu
in Network Management
05-15-2013
05-15-2013
1/here we use nexus 5k, nx-os, so may be command is little
different.2/nx-os snmpv3 config may be mo...
Created by
xh_liu
in Network Management
05-14-2013
05-14-2013
can you put your snmpv3 config here, so I can confirm if I do right snmp
config.thanksmy snmp config...
Public Statistics
| Date Registered | 04-04-2001 10:27 PM |
| Date Last Visited | 06-19-2019 12:35 AM |
| Total Messages Posted | 30 |
Helpful Votes Given To
