Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,ACI underlay is OVERLAY-1 vrf, so i think spine and leaf connection should be trunk config, and use subinterface for overlay-1 vrf and use 802.1q config, like:spine:int ex/x/x.xxdescribtion connect to leafip vrf forwarding overlay-1enc dot1q xxip ...
I want to test service graph use APIC 2.2（3j）, I use asav device package (asa-device-pkg-1.2.9.18.zip) and asav version 9.6(4).
After I creat the device under my tenant, the device state is Stable, but there are fault messages, error code is F1081 a...
My question is:
The ACI integrates with vCenter.
I want to use a vm as a external router(eve-ng）.
I don't know if I can use same ACI interface which connect to VMware Hypervisor for L3 out interface config?
If it work, how to implement it ?
Thank a l...
My customer have some DLSW config on a Cisco 2811 router, but now Cisco 2811 router is EOS and EOL，it means the product can't get any support service now.
My customer don't want to change original DLSW config in futrure new device.
So I try to find...
Here is my config:
r3:
(dns server)
ip dns server
ip domain lookup
ip host baoshan.com ns ns2ip host ns2 192.168.100.2
!
r4:
(dns client)
ip domain lookup
ip name-server 192.168.34.3 ( which is r3 ip address)
!
r4: ping test.baoshan.com
r3 didn't for...
Dear sir:Thanks for your detail reply.I think I know user vlan traffic will be changed into vxlan(l2vni/l3vni) traffic based on traffic type.I just want to know how ovlay-1 traffic walk between spine and leaf which you say it may use proprietary enca...
thank you. I had checked the syslog message, I just don't know how to do next step.
I want to know if these version is ok.
any suggestion based on these syslog message is appreciated.
F1081 - fltVnsRsALDevToDomPResolveFailSyslog Message%LOG_LOCAL0-...
So I understand that I need one vlan pool for VMM domain, which include a static entry range; and another vlan pool for L3 domain. The two polls should have same static vlan used for l3out.I will try it soon.but why I need to create the EPG you writ...
