Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello CommunityWe are replacing ASA 5500-X as RA - VPN Concentrator with Firepower 3105 managed with Firewall management Centre 7.4.In the ASA I can find a Syslog Viewer (Latest ASDM Syslog Messages) in the ASDM dashboard and under Monitoring> VPN > ...
Hello
In our Clientbased - VPN with AnyConnect 4.3.02039 an ASA 5500-X Series with 9.4(3)12 we have to optimize the cipher suites.
Before we had the 3.x Client only supporting TLS 1.0.
Now we changed to TLS 1.2 only an tried to configure more secure ...
Hi AllWe assign in our IPSec VPN the tunnel-address from our centralized dhcp server pools.In the profile we have two server's ip configured.In test (whireshark) we noticed that the discover always go to the first configured ip.I do not understand an...
Hi I got a new Cisco 3845 under my adminsitration.For some special events I do automated actions (e-mail's) from Cisco Works 2000.One is if power supply fails.Problem now is, tha a ps fail message will be repeated every 20 seconds to syslog server - ...
Hello We are testing the AnyConnect VPN Client to replace legacy IPSec VPN Client 5.0.x.We could setup the connections with SSL and IPSec (IKE v2).Now we have to decide which ist the better method.What is your experience or suggestion ?Thanks for any...
HiSome days ago on my cluster 3.1 patch 9 it startet with same alarm, repeating every 75 minutes.Alarms: Smart Licensing Id Certificate Renewal SuccessThe "renew Registration" button (Administration - System - Licensing would take this action:""This ...
You can connect to the "Assigned IP Address" (not "Public IP Address") from the remote client.
Never tried with rdp, but with other tools worked fine.
Regards
