Hello, I'm trying to configure simple egress priority queueing for trusted ef-marked traffic:!table-map TBM_DSCP2COS_VOICE map from 46 to 6 map from 40 to 6 default copy!class-map match-any CLM_EF description EF traffic match cos 6 !policy-map P...
Hi folks,because of overlapping subnets I need to configure 1:1 NAT to a customers VPN site, so far so good.But my ASA5505 in the customers network isn't the default gateway I have to us Source NAT after it. Now I have the problem that I don't know h...
Hi all,I have some problems using VTP and PVST+ so I decided to get rid of VTP.Is there a way to remove VTP from an access switch (VTP client to VTP transparent) while keeping the VLANs on this switch so two trunk ports and all access ports do not ha...
I think I got it, so I answer to myself: https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-congestion-avoidance/10107-showpolicy.htmlIIRC the counter only increases in case of congested interfaces.
Maybe it's a little bit hard to visualize, so I added a image:In the 10.1.2.0/24 there are requests with 10.0.1.0/27 as source IP and these packets are routed to the default router, I have no chance to add static routes or somethin to choose the righ...
Hello Peter,moving from PVST+ to MST needs a recalculation of the spanning tree so there is a downtime for about 30seconds for participating VLANs but I don't have a downtime window in the next days and I am not able to create new VLANs with PVST+ in...
Hi Peter,because of a bad STP design and per VTP widely spreaded VLANs there are too much STP instances on some 2960 and 3560.Because of this and because I don't want VLANs automatically created on the entire network I want to remove it.Best regards,...
