Static NAT with Source NAT afterwards

[rene.caspari]

Hi folks,

because of overlapping subnets I need to configure 1:1 NAT to a customers VPN site, so far so good.

But my ASA5505 in the customers network isn't the default gateway I have to us Source NAT after it. Now I have the problem that I don't know how to configure 1:1 NAT and Source NAT, any ideas?

Best regards,

Rene

[rene.caspari]

Maybe it's a little bit hard to visualize, so I added a image:

In the 10.1.2.0/24 there are requests with 10.0.1.0/27 as source IP and these packets are routed to the default router, I have no chance to add static routes or somethin to choose the right way back.

If the packets are source-natted with the IP 172.17.1.1 (Interface of the ASA), the way back is correct.

HTH, Rene