Hi All,
I have been assigned a task to install and integrate "Cisco Instant Connect" into network.
What are the prerequisites for "Cisco Instant Connect"? i-e do i need to have CUCM/CME.
How can i get Cisco "Instant Connect Server" .OVA File?
Looki...
Hi All,
I am using Cisco 5915 ESR router having IOS version 15.2
As per customer demand i need to run diagnostic test on router to check the pass & fail test.
I am trying to use "System Diagnostic" in Cisco CLI analyzer, but screen only displays ...
Hi All,
I am using Cisco 5915 ESR router having IOS version 15.2
As per customer demand i need to run diagnostic test on router to check the pass & fail test.
On switch module "#show diagnostic post" has been quite useful.
I need help regardin...
Hi
I have installed CUCM 9.1.2 and Integrated IM&Presence 9.1.1.3000 with CUCM.
I have ip phones registered on CUCM and 2 Andriod phones using Cisco Jabber 12.0.0
I can call from cisco jabber to IP phones and everything is ok.
I can call from ci...
Hi All,
I have got Cisco 5915 Mobile Router it has boot issue.
When powered on it cant be accessed via console cable and status light is glowing green and blue.
Need help in regards.
Thanks
With Best Regards
@marce1000 my very initial query was regarding standard diagnostic commands or procedures.
What are the commands/procedures that is can run on my equipment for diagnostic tests?
Below are my equipment details.
Cisco 5915 ESR router having IOS...
@marce1000 When in run "System Diagnostic" on Cisco CLI Analyzer after loggin into Router CLI my screen shows "loggin In" message.
Attached is the screen shot for reference.
@marce1000 when i run System Diagnostic my screen shows "loggin In" message attaching the screen shot as well.
Screen only show "loggin In" message, i kept waiting for more than hour but nothing happend.
@marce1000 Attached are screen shots for Cisco CLI analyzer.
Attached snap shot " Cisco CLI analyzer Router Login" is for new session
Attached snap shot "CLI ANAYLYZER SSH CONNECTION" is of ssh connection with Router through line VTY line 1
Attache...
@marce1000 I tried my level best to utilize the "System Diagnostics" but no vail.
Like when I run "System Diagnostics" CLI Analyzer displays "logging In" message on screen.
Attached are screen shots are of "devices added" and "logging In" message...