Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello,at the moment i have two 4404-100 controllers. in the backbone we have two 4500 switches. the two 4500's are connected via an 4 gbit channel. for l3 redundancy weuse hsrp. the controllers have the following ip configuration:controller 1: vlan 2...
hello,perhaps somebody can help me with these error messages i receive from the wlc:Oct 26 09:07:21.073 apf_wme_utils.c:2640 APF-4-RCV_ACTION_FRM_WITH_CODE: Received Action frame with code 2 from mobile station 00:1D:A2:30:E7:4DOct 26 00:06:57.271 ap...
We got some trouble solving this puzzle regarding PIX Iinstallation over a monomode Link. The 525 is only offered with a SX card. Is anybody aware of a LX Version PIX?If not - has anybody tried using SX GBIC's over short monomode fiber installations?...
I'm quiet confused regarding a CE3 Module for 3640.Data Sheet says yes the configurator doesn't show it as an option. Is there a 34Mbit E3 Module available for the 3640 or not? Can any one sort this out for me.Data Sheet Mentions the Module as "NM-1A...
hi,i have some problems with cww 6.1 and an 4006 with the supervisor-engine 3. ports that are not connected, are shown as "failed" (red). the ios version is 12.1.12c. all device-packages are up to date.here is an screenshot:http://www.virtualvitalit...
this is what i also think. for testing i have done this configuration. the lwapp ap's spread over all four interfaces. but the configuration isn't running stable. randomly both controller are ending in an reboot loop. nothing to find in the logs on t...
Thanks for the Feedback!Yep that is exactly what i expected. No LX Version - the thing with the two Gbics in one seperate VLan sounds interesting and might be a nice workaround. You got always some GBICS flying a round compared to SX/LX converter.We ...
The customer said he needs a 34 Mbit ATM Module for 3640 which IMHO should be the NM-1A-E3.So if i got this correct - The module is available for the 3640 the only thing which is required is an IOS greater or equal 12.1(2)T.Thanks for the info, funny...
hi daniel,it is a strange thing. after 2 weeks installing, i have taken a look at the logs and find out that the ani-server have problems to open the german-path from cisco-works (programme).i think, when we would use an english version of the nt-ser...
