Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello. A CSR1000V is having noticable packet loss on a network. I may have found the counter indicating the packet loss occuring, but I dont know the actual cause for the packet loss. The command:#show platform hardware qfp active statistics drop det...
Cisco Adaptive Security Appliance Software Version 9.1(4); Device Manager Version 7.1(5)100; anyconnect-win-3.1.05152-k9.pkg Hello, I am trying to implement Certificate Matching for certain client profiles. However 'certificate matching' does not see...
I am running:Cisco IOS XE Software, Version 03.11.01.S - Standard Support ReleaseCisco IOS Software, CSR1000V Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S1, RELEASE SOFTWARE (fc2)using license:License Level: premiumLicense Type: Evalu...
Hello. I am running c3750-ipservicesk9-mz.122-55.SE8.bin on my switch and I'm tinkering with netconf.The netconf session is set up and im sending this query to the switch:<?xml version="1.0" encoding="UTF-8"?><rpc message-id="101" xmlns="urn:ietf:par...
Hi. Can anyone explain to me what exactly is the "Disable Automatic Certificate Selection" supposed to achieve?My theory is that upon connecting to a VPN gateway (ASA) I am given an option to select the certificate I would like to use for authenticat...
Update- got my problem resolved. I discovered I had asymmetric routing toward my VPN peer. It seems that the tunnel is established fine over an asymmetric route, but IPSEC packets are dropped. Just make sure that the ingress and egress route for the ...
Hello. Any updates on this matter? I am having the same exact problem with two ASA5550 doing site-to-site ipsec tunnels. Both ASAs are running 9.1(7)4 software (asa917-4-k8.bin). One side has only Tx counters increasing and Rx at zero, and the other...
Sorry for the late reply. I did not resolve it. I also haven't had time to play with it more. Maybe I will come back to it some time and try with newer Catalyst software.
Same problem here with N1kV version 5.2(1)SV3(1.2). 5 minute input rate 1951392 bits/second, 3233 packets/second5 minute output rate 61691180064 bits/second, 5103193 packets/second Actual traffic is 500-600Mbit/s, but the output shows 60Gbit/s
