About togrul.azizli

togrul.azizli · 05-31-2016

I have 7609 router which has two Main processor units (like 2 routers) and one of them is in rommon mode and has no any IOS in it . So i want to configure new IOS there but I dont know how supervisor will react to it , because 1 unit works with 12.2(...

togrul.azizli · 05-26-2016

I have router with specifications below, and I need to configure this router as PPTP server but I couldn't find anything about PPTP (vpdn) in documentation . My question is can I use this router as PPTP server for my clients or not ? If yes , then h...

togrul.azizli · 07-07-2015

Is it possible to create multiple IPSEC tunnels (site-to-site or RemoteAccess) with only one ISAKMP policy?

togrul.azizli · 07-09-2015

In your inside network , there are different ip addresses in use not only 192.168.0.100 but in access list you permitted only 192.168.0.100 ip address . You can edit it to 192.168.0.100 255.255.255.0 .Like instead of access-list outside_acl permit i...

togrul.azizli · 07-09-2015

So how VPN works :You create VPN tunnel on public addresses (your ASA and remote ASA) and you create access list which determines interesting traffic for VPN ,in other words you determine which traffic will be sent over VPN tunnel. ex : your inside s...

togrul.azizli · 07-09-2015

I mean you want to create site-to-site VPN between two sites , so you have to select a subnet which going to use VPN also in another site also like this . example : 192.168.0.0/24 subnet will use VPN in one site 192.168.1.0/24 on other site . Do you ...

togrul.azizli · 07-09-2015

What is ip range that you want to VPN?

togrul.azizli · 07-09-2015

Hi Do you have NAT in your device? I mean subnet that has to be in VPN can use your internet ?The ip range that goes to VPN tunnel , is this ip range NAT-ted also? If you can share your configuration it will be helpful for me to understand the issue

Member Since	‎01-23-2015 05:50 AM
Date Last Visited	‎02-23-2018 10:13 AM
Posts	17

User Statistics

User Activity

Cisco 7609 router problem

Cisco 7600 PPTP problem

Multiple IPSEC tunnels on one ISAKMP policy

In your inside network ,

So how VPN works :You create

I mean you want to create

What is ip range that you

Hi Do you have NAT in your