Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have two 5548UP version 5.2(1)N1(1b) connected to Nexus two 7k (version 6.1.2) forming double sided vPC design. The 5k is acting as access layer top of the rack and 7k as aggregate. The 7k is configured with vrf contexts and vlans with HSRP (all...
I have ASA 5520 running 8.3.2 with the following interfaces. All that I need is the best practice so that host in each network can communicate to other networks vise-versa. I want the networks to communicate bidirectional to each other. And the users...
I have two ACS 4.2 configured as expected for replication but Primary ACS does not show any synchronization partner either on the left or right. The Secondary ACS does have synchronization partner listed. What could be the reason for this?
Hi all,I am receiving incorrect syslog message format with the famous six octets on my netcool trap collection box. The double date formate is causing some headaches. Sample data from Netcool:Aug 14 15:56:19 [10.155.14.249.216.64] 263: Aug 14 15:56:1...
Hi Rick,
Thanks for your response. The VPN is being terminated on HSRP VIP. This HSRP is neither of the MPLS.
I want to redistribute 10.130.130.x and 10.129.129.x to BGP network so that VPN tunnel traffic could pass through BGP when failed over to B...
Scenario:
Two Data Centers connected via two different MPLS Providers, layer 2 and Layer 3, respectively for redundancy. Then we decided to be more secured by creating high availability VPN between the data centers to encrypt sensitive traffic goin...
I know this is old post, but I am having exactly the same issue. See link belowhttps://supportforums.cisco.com/discussion/12479401/asa-5505-version-915-ipsec-remote-vpn-ikev2How was this resolved?
Hi Jumora,I was trying to do something different in case I want to NAT traffic on 8.3.2, but you pointed me to the right direction that no NAT feature on 8.3 version. I am still researching on how I can NAT if I want to on version 8.3.
If you copy and paste tailor to your specifics such as IP addresses, it should work perfectly. aaa group server tacacs+ managementserver 192.168.5.7server 192.168.5.7ip vrf forwarding mgmtVrfip tacacs source-interface FastEthernet1!!aaa authenticatio...
