Hello,We backup the running config on the 6509 does it also backup the vlan.dat as well?I tried command dir/all and just dir but did not see the vlan.dat listedthanks in advanceMark
used install all kickstart command failed on:boot variable "system" FAIL. Return code 0x4045001E (mismatch between actual image type and boot variable).Version compatibility check failed. Return code 0x40930011 (Image verification failed)Did not thin...
Problem FEX hangs on "Image download"current versionkickstart: version 4.1(3)N2(1)system version 4.1(3)N2(1)feature Fex enablefex association 1001. Is this syntax correct? 2. Then what is the next step after I get image to 5010GettingNexus_5010# co...
I am looking at setting up 6509-E switch utilizing WS-X6716 and Nk5 with 2148T extender. If possible if you could provide link(s) on configuration. This will only be a single chassic setup. The 6509 has dual supervisor 720thanks,Mark
Thanks for responding,If possibleWhat are the default settings for a Nexus 5010 IOS 4.2.1 for connecting a 3750G switch. In particularly the (settings for) Native VLAN on both sides. The current documentation on the web for the 5010 does not provide ...
Thanks Fabienne for responding,Yes on port-channel, looking at connecting N5k to 6509 WS-X6708-10g switching module with a single 2148T FEX for the servers. Using a standalone 6509 dual supv. What is the preferred method using this setup
