Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Ive got a situation where i have three possible physical point to point interfaces that i can use for traffic. one interface will be for normal LAN traffic and the other two will be reserved for FCIP traffic which is distinguishable by its port numb...
im pretty sure the answer to this but i want to make sure:i want to connect pbx A to pbx B (two different brands) over IP. the cheapest I can come up with is to put a router with an fxs and fxo at each location and program the gateways as h.323; man...
I have a 2811 with two f/e's, and 2 wan circuits: 1 for public internet (s0), and one for private wan connections (s1). f0/0 has a public ip that connects directly into a firewall. the firewall has a dmz for a web server. i plan to have the priva...
i have a 3508 directly attached to a 3560 via fiber. i create a vlan on the 3508 and an vtp domain with password and join the 3560 to the same vtp domain and password. other switches attached the 3508 get the updated vlan(s) through vtp advertiseme...
we have eigrp running on all three links. we havent played with the metrics on the links themselves yet, but further away from the links, at the core, we specify that certain traffic should be routed to the switch that terminates the three links. i...
im using cisco's ACS server, but any ietf radius will do. im not familiar enough with IAS to tell you where to add the parameters for policy 25 (Class).ill give you more info on how im using radius in my config:RA vpn with tunnel group name definiti...
i use dynamic access policies to achieve this without using aliases. im using cisco acs, and apply in the radius class field (number 25) with a setting, i use OU=groupPolicy, where groupPolicy is the name of a specific group policy i have defined in...
im having the same issue, and ive looked up and down cisco's site for some help. the most ive come up with is a general guide on what fields to code, like "make sure you capture the redirect url".ive copied the source code of the internal auth page,...
