Hi,I have a Cisco Catalyst 4507R+E and 4510R+E Chassis and this device is currently installed with 2 superv.My question is, how can I determine the best IOS versions for the device and also where can I download it from?Thanks in advance,Omni
Does anyone know why I am getting the message "No extensions found on the call agent" while trying to add a new user on the CUE 8.6 GUI?Every little helps.Cheers,Omni
How can I have CME to automatically switchback to the primary device after having stored CDR in the secondary device in case of a failure to reach the first device? Thanks in advance,Omni
SRST 9.1CUCM 8.6We have set 74 phones enable in CUCM to register in SRST, however only 7 phones got registered while in SRST.Any ideas from where to start checking?Thx,
Hi Amit,I am just facing the same issue. I am sure your suggestion would sort this out but I can't find the LowPriorityQueueThrottlingMaxCount parameter by going to System>Services Parameters> Cisco CallManager>...in Cisco Unified CM Administration.A...
Hi Felipe,What exactly have you done to resolve the issue with the call transfer? I've looked at the Show Run output but could't find any changes..Thanks,Omni
Hi Ronak,By reading the SRST configuration guide I came accross with the following: Step 2 ip source-address ip-address [port port] [any-match | strict-match] Example: Router(config-cm-fallback)# ip source-address 10.6.21.4 port 2002 strict-match...