Hello,
I need to know how we can apply the QoS between two PE (IOS and XR) to prioritize the 3G voice traffic between the two PEs carry through the pseudowire sessions.
on both CAN, we use subinterfaces with dedicated VLAN for each service, so the ...
Hello,I need to know same informations about SP BB design, in our case we have two Cisco routers 7600 for Internet exchange with upstream SPs (3 different SPs) and two 6510 (PE & P at the same time) all with sup 720 3xbl.I want to know the bests prac...
Hello,I need to connecte Cisco switch 3750 with a huawei DSLAM with FO, i try to connect them with LX SFP, but the cisco side (that i manage) still with led orange, and a lot of errors when a use show interface x/x.please any idea -------------------...
Hello,I have made an etherchannel between 6509 and 7606 with two giga interfaces on eatch one to have more bandwidth (2Go), but the Etherchannel does not exceed 1 GB (Below is a capture for Etherchannel taken from Solarwinds).the both 6506 and 7606 u...
Hi all !!! Hope everyone is well !!!I have a WAAS environment in place we want to deploying WAAS mobile for teleworkers. My question is, can WAAS mobile works for users that use secure access with https (not vpn connexion)Thanks in advance !!!
Hello Gilang,I don't know if you have solved the issue or not, cause i have the same problem between two PE, i have 6 VRF, and the problem occurred just for one, I do not know where the problem is ?Thanks for your help
Hello,thanks for your respondI have more than 1 conversations (they are a lot of them), so they will be loadbalanced between the two Gig interfaces, in this case the etherchannel have to exceed the 1.2 Gig.Best Regards
