Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a VPN setup that allows split tunnelling. We currently moved to using Office 365 and Microsoft teams. The issue is when users are connected to VPN the cannot access Teams or Office 365. The theory is that instead of using the tunnel to access ...
I am currently moving from ASA 5525 to Firepower 2140 with FMC1000. I am in the process of moving object. I have over 3K objects and I would prefer not to do them all one-by-one. I cannot use the migration method provided by Cisco. Is there a CLI opt...
I'm currently converting from ASA 5525 to FirePower 2140 w/FMC. As I am auditing my current ASA I see there are lots of No-nat rules with hitcnt=0 these look to be at (0) for a long period of time. I wanted to understand does the NO_NAT rules actuall...
Hello -- I am trying to determine if my psckets are being marked withe correct DSCP value on a 6513 Sup2t. I have put all the output below. My primary question is the traffic coming from port 2/3/23 being marked with DSCP 46? I am using MS Lync and t...
I just installed a new 6800x with 3 external FEX 6800i and they're currently in burn-in status nothing attached to them. The sho process output is: CPU utilization for five seconds: 30%/0%; one minute: 32%; five minutes: 32% PID Runtime(ms) Invoked...
I just installed the 6800x code: c6880x-adventerprisek9-mz.SPA.151-2.SY3.bin And I have high utilization:CORSHE1-LAMR-SW1-G1E#sho processes cpu history 3333333333333322222333332222233333222233333333333333333333 444477777444446666655555666668888...
Apparently this is a known bug with Cisco CSCul08799IPDT: nmsp prevents converting the port from access to trunkCSCul08799DescriptionSymptom:"nmsp enable" doesn't allow the port to be converted from access to trunk. Even when "nmsp attachment suppres...
I have access to my terminal server I have connected to it via console cable. I ran the "show line" command after trying to attach to the router and I also added a sw1 on 2009. See output below:T1#sho line Tty Typ Tx/Rx A Modem Roty AccO Ac...
R1 is powered and I can console to it directly using secureCRT and the cisco provided cables, nothing on the device preventing connectivity. Can't do a show line as I'm away from the equipment. I can do that later this evening. I have looked at the ...
