Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Folks,
Just want to know, how Cisco ISE works with WLC FlexConnect (AP deployed in FlexConnect Mode), if WLC goes down due to some reason. How users will get Authenticate, Authorize ? Does FlexConnect support all ISE features (like Posture, Profil...
Hi Folks,
We are running Cisco ISE 1.4 patch 6. Users (Windows 10) using machine based authentication with native windows adaptor after posture assessment (NACagent), network adaptor showing no internet access, but actually work fine.
Kindly advise h...
Hi Folks,
We are trying to implement two factor authentications (Certificate & Domain Users) for Cisco Anyconnect VPN users. We successfully installed the CA Root certificate to the ASA through ASDM & after that we generated the identity certificate ...
Hi Folks,
We are facing a problem that Cisco ACS 5.7.0.15.1 is unable to get synchronize with the NTP Server (AD as a NTP Source). See output below. Any help will be appreciated.
TestACS1/admin# show logging | include ntp
Nov 16 10:42:32 TestACS1 mon...
Hi Folks,I am having issue that mac addresses which we are trying to add under Internal Endpoint Group for MAB getting disappear automatically after few minutes. We tried multiple mac addresses but result same. We can see the mac address which we add...
From windows machine which is connected on extender 2000 port to gateway which is on core switch 4500x mean SVI.Sent from Cisco Technical Support iPhone App
Hi Steve,Now the hosts connected on nexus 2000 can ping their gateway which is on Core Switch 4500x as well as to each other different subnet but while doing testing I found that ping response time & TTL value is not stable. Response time is going up...
Hi steve,I removed this command ( spanning-tree guard root) on nexus 5000 port-channel. Do I need to configure this on Core Switch 4500x portchannel which is being used to connect with nexus 5000.Core Switch 4500xinterface Port-channel11 description ...
Hi Steve,I don't know why did I put (spanning-tree guard root) on nexus 5000 portchannel which is being used to connect nexus 5000 to Core Switch 4500x VSS.When I did show spanning interface port-channel 11 on Nexus 500 it shows below output.HQDCDSW0...
Dear Steve,I enclosed the configuration of CS 4500X VSS & Nexus 5000. Could you please have a look on it & let me know what I am missing. I am suspecting that Nexus 5000 is not working as a layer 2 switch that is why it is not forward traffic to Core...
