About IZHAR HUSSAIN KAZMI

IZHAR HUSSAIN KAZMI · 06-10-2013

hi,I am receiving the following error on 3750 stack switches. have already verified the power status and found ok. IOS used: Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)SE3, RELEASE SOFTWARE (fc1)----------------------...

IZHAR HUSSAIN KAZMI · 01-23-2021

Faced the same issue while configuring a vPC between Cisco Nexus and Dell switches. There is no L1 issue found during basic testing. Defaulting the config on physical interfaces and recreation of Port-channel interface helped to bring the port to (P...

IZHAR HUSSAIN KAZMI · 07-28-2020

PE2_R3(config)#router ospf 1 vrf Cust-A VRF specified does not match existing routerPE2_R3(config)# PE2_R3(config)# PE2_R3(config)#router ospf 10 vrf Cust-A PE2_R3(config-router)#Here is an example. Please check if you are using the same router-id a...

IZHAR HUSSAIN KAZMI · 12-12-2017

very helpful note. Thanks for sharing.

IZHAR HUSSAIN KAZMI · 07-22-2015

This is just a further cosmetic explanation of earlier provided correct answer. no ip address <ip address1, subnet mask1> secondaryip address <ip address1, subnet mask1> ! it ll overwrite the existing primary ip address.ip address <ip address2,...

IZHAR HUSSAIN KAZMI · 07-15-2013

bgp always looks for the exact match in IGP routing table so network should be available in routing table not the database table.izharCCIE 37523

Member Since	‎02-18-2013 10:22 PM
Date Last Visited	‎01-31-2021 02:58 AM
Posts	11
Total Helpful Votes Received	41

User Statistics

User Activity

power stack has unbalanced power supplies

Re: (suspended(no LACP PDUs)) Nexus 9000

Re: VRF with OSPF problem

Re: I've had the following

no ip address <ip address1,

why external ospf routes not redistributed into BGP