Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Cisco 8945 IP Phone with SCCP firmware. I like to convert it to SIP firmware. I don't have Call Manager but TFTP loaded with SIP firmware for the 8945.
I tried to reset the phone to boot up and connect to TFTP server but it keeps coming back...
I have a spa525G2 using SIP at a remote location which needs to register to a TFTP server over the Internet.The remote locaiton does not have a TFTP server or option 66 or 150 in DHCP, so I want to either hard code the IP of the TFTP server in the 52...
I have a spa525G2 using SIP at a remote location which needs to register to a TFTP server over the Internet.The remote locaiton does not have a TFTP server or option 66 or 150 in DHCP, so I want to either hard code the IP of the TFTP server in the 52...
We have UC520 connected via SIP trunk to a provider. We have been experiencing bad quality when more than one line is connected to a conferencing system outside. So lets say more than one person call this conferencing system through the SIP trunk fro...
Our SIP providers is saying we should configure our UC520 to communicate with their proxy sip devices for more security between us and them. can anyone give me an ideas of how to configure ALG from UC520 to a SIP proxy. The current setup works fine b...
Looks like there were two problems. One is the fact that you cannot just jump from the 9.2 load to 9.4. The other is that the phone is quite sensitive and cannot be updated from the remote TFTP server and you can have packets loss that interrupts the...
Ok some progress. I used your SEP file example and this is what I am getting now
Feb 19 08:22:32 pb in.tftpd[14143]: RRQ from 10.0.21.147 filename SEP00077DDFD5C2.cnf.xml
Feb 19 08:22:34 pb in.tftpd[14144]: RRQ from 10.0.21.147 filename SIP894x.9-4-...
It is reaching the TFTP server but its looking for SEP files
Feb 19 07:30:25 pb in.tftpd[13216]: RRQ from 10.0.21.147 filename XMLDefault.cnf.xml Feb 19 07:31:02 pb in.tftpd[13217]: RRQ from 10.0.21.147 filename CTLSEP00077DDFD5C2.tlv Feb 19 07:31:0...
The status shows very little information. It shows
[00:00:10, 01/01/2010] system boot up (SCCP 9-1-2-00)[17:59:22, 02/18/2017] SEP00077ddfd5c2.domain.com Get ip from DHCP server : 10.0.21.147
I don't know why it appends the domain to the SEP file ...
Thank you for your answer. I have been doing all these exact steps.
The problem is the phone must be erased at some point of the sccp firmware. When doing so with the 7900 series, once you unlock the phone and ask it to reset / erase it does so by h...
