Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
i'm struggling to find any docs on Jabber Multiline & per line support/config for Unity Connection.
Is this as simple as having correct versions of the product set, installing the relevant cop file on CUCM & then just using alternate exte...
Hi,I have asked this question on the partner UC readiness page, but no answer as of yet....I have just upgraded our CUCM to 9.0 and have all internal DNs associated to directory URIs as per my LDAP sync.I have a VCS integrated via a SIP trunk and mul...
Hi All,I am trying to set up a site-to-site VPN between an 1841 Router and an ASA5510 running 8.4. Both ends negotiate their outside interface IP addresses via DHCP and are connected to ADSL lines.I have setup the 1841 to an ASA with a fixed IP addre...
Hi allOur customer host web applications that are accessible via Public addresses that are NATted to VIPs that reside on a DMZ. Their previous topology was upgraded from 2 PIX firewalls & 2 x Alteon load -balancers to 2 ASAs (active/standby) and 2 ...
Hi all,I am hoping that this may well be something really obvious that I have missed but here goes.One of our customers has an established centralised Multi-site CUCM v6.1(3) solution with 1 x Publisher & 1 x subscriber.The Core site has a 2811 ISR ...
Hi Anthony,
Thinking through the process & design really. Yes i've configured alternate extensions for users previously & can't really see the use case for separate mailboxes (unless they were shared lines and departmental as opposed to user based...
Hi Guys, thanks for the reply
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/12_0/cjab_b_feature-configuration-for-cisco-jabber-120/cjab_b_feature-configuration-for-cisco-jabber-120_chapter_011.html#reference_08DB2E9280C0A8ABF98E1B32960...
Hi Guys I am trying to enable SIP URI dialling for an on-premise IM&P solution but the local jabber-client does not appear to accept a valid locally installed jabber-config-user.xml or jabber-config.xml files uploaded to CUCM TFTP root and TFTP servi...
Hi Guys, I am trying to enable SIP URI dialling for an on-premise IM&P solution but the local jabber-client does not appear to accept a valid locally installed jabber-config-user.xml or jabber-config.xml files uploaded to CUCM TFTP root and TFTP serv...
Hi Amit,FYI all works fine.I am using CUCM 9.0 and was referencing a URI without remembering that 9.0 host portion is case sensitive,I think i will be good to go ahead and test now,many thanks againStuart
