Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,Im setting up a remote site connectivity to HQ using 2- ATM links. After configuring as per the attached , the two routers are not forming eigrp neighbour Relation.I can ping 224.0.0.10 from both routers using their respective interface Ip addr...
Hello , Iv an IPT setup consisting of an ISDN PRI terminating on a 3825 configured as MGCP Gateway on Call manager 5.x setup. Calls are coming through(establishing) but there is no sound. Calls dont drop either until graceful disconnected by user. C...
Hello , Iv a cm setup consisting of an ISDN PRI terminating on a 3825 configured as MGCP Gateway on Call manager 5.x setup. Calls are coming through(establishing) but there is no sound. Calls dont drop either until graceful disconnected by user. Con...
Hi,I ve multicast configured on 2 interfaces of ASA(no multicast router used)-with Multicast server(source) on one interface of asa and the client on another. The multicast works fine at first but becomes intermittent after sometime(stops and works a...
Hi Pals. I ve multicast configured on 2 interfaces of ASA(no multicast router used)-with Multicast server(source) on one interface of asa and the client on another. The multicast works fine at first but becomes intermittent after sometime(stops and w...
Hello Kevin/Giuseppe,Thank you for sacrificing your valuable time in assisting out. I ve done static neighbour on both routers and still no change. I believe this has to do with the dot1q tagging/subinterface on R1 since Ive a 3rd site that is also t...
Kevin,Thanks for your response.Ive actually shutdown interface .20 for now as I try to resolve the peering issue. Ive done similar implementation on ATM /FR without Dot1q taging or sub-interface and it is working fine.Outputs are as follow:IP-EIGRP i...
Kevin,Thanks for your kind response and time. I ve updated the entries as follows but still no changenetwork 192.168.1.0 0.0.0.255network 192.168.2.0 0.0.0.255Rgds
Kevin,Thanks for your kind response. However sorry I missed out the mask settings on the posted configs. The actual configs used includes the correct mask as bellow:router eigrp 60 network 192.168.0.0 0.0.0.255 network 10.1.10.0 0.0.0.255Anything el...
Jorge,Thanks alot for your kind assistance. The problem is actually with clocking. I added 'network-clock-participate slot 1' on the GW and it is now working fine.Kind Regards
