Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So i will try to explain this clearly. We are in a fairly large environment of 20 5508s and we are in the process of going through our 4 mobility groups, one at a time, and upgrading from 7.4 to 8.0. We upgrade our backup controller, move the APs to ...
Upgraded the lab controller to 8.2.130 to test some 3802i's we got. Access points come up fine, but WLANs don't broadcast (or even show up). Put a 2602 on there and it works fine, test WLANs broadcast and we are able to connect. For some reason the 3...
Hey....As the title suggests, I am having problems deleting floors and buildings from the map section of Cisco Prime. I screwed up while putting the map files in, and cannot remove them... it just times out. The only solution I have come close to fin...
I have two 3502e's that won't join our 5508 controller. We have rolled out about 600 APs, a few on this switch (4507) as well. We have plenty of power, plenty of licenses, etc. The only thing that sets these particular APs apart is that they were SMR...
I have tried every browser, and tried logged in to every virtual domain, including Root. Still no luck... we are running 2.0.0.0.294. I guess TAC is the next move... Thanks for your help!
Welp, thanks for your help. I was able to find them, they landed on a controller in a far away land. Sometimes they have a mind of their own I tell ya. Happy new year!
yes only two APs... and they happen to be the two APs that were shipped recently from SMRs. I will post the log ASAP, they are somewhat tough to get to.
