Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I was wondering if I set up a SSL VPN on UC520 on a non-default port, say 44300, where do I enter that information in on an SPA525G? Loooking into this option as as the system is currently setup the certificate presented by an internal server is thro...
I've been playing with a SIP trunk and have noticed a potential discrepancy between CLI and CCA 2.0. Using the generic SIP template.When entering the realm/domain configuration in CCA all boxes turn green and config is applied without problem.When e...
Hi,I've got an interesting problem with current VPN setup.Setup is VPN concentrator with public and external interface terminating all VPN connections.Currently there is are 5 users (general managers) who use PPTP to connect to the network from anywh...
I had the question put to me if it is possible to have a redundant VPN setup for a remote site.The remote site has a single router with one ADSL connection.There are two routers at the HQ offering redundant paths to the network, but these two are loc...
If you have default timeout values for xlate, connections etc.What happens to the existing connections when changing connection idle timeouts? Are the timers on the existing connections reset to 0 and the timer started again or does the existing tim...
Feature request: The ability to preview and confirm or cancel the configuration sent to the UC, I know postview is available but preview with confirmation could help avoid impacts on customer production equipment.Thanks
I've found CCA to cause more problems than it resolves. Randomly removes or defaults components of the configuration when connecting to a system (systems only ever configured by CCA, so not a CLI/CCA compatibility issue). Last two examples:- UC520 ...
I was able to answer my own question, for reference, specifying a non-standard SSL port on a 525G is the same as you'd use in a browser, "x.x.x.x:"Cheers
Interface resets are caused by:- interface going down- interface being looped- or a packet not being sent for several seconds, the router performs a reset to try and clear the error condition.CheersGideon
