Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a problem to expose you.I have a core switch that is a member of an OSPF area.The neighbors of this switch are two provider routers in the same area OSPF.Today after a migration, the provider has set up a route to the core switch in 10.1...
Hello everyone, I experimented unsuccessfully with functionality SNR. When I configure, SNR on a phone and I setting the second phone to ring after a while it works very well if there is another internal SCCP phone or to an external number as a fixed...
Hello,I want to install a WLC controller on the central site and 50 Access Point on the remote site.I have 10 remote site with 5 Access Point per site.Each remote site is connected to the central site with lan to lan VPN (ASA 5510 at the central and ...
Hello,I have 2 ASA 5510 SEC-BUNI want to enable failover.I have this configuration : Ethernet 0/0 : OutsideEthernet 0/1 : InsideEthernet 0/2 : DMZI follow the example : How to configure Failover on ASA, and i can read that i need two interface :One f...
Hi all,Isn't the problem with early offer in SIP invite ? I know it's an identified problemBest regardsBenoît PETRY Sent from Cisco Technical Support iPhone App
Bonjour Pierre-Yves,Je ne sais pas si ton projet est encore d''actualité.En tout cas tu as vu juste il te faut un equipement Layer 3 pour effectuer le routage inter-vlanUn switch du type Catalyst 3560 ferait l'affaire ou alors un routeur.Esperant av...
