Hi fellows, I've a Cisco SPA502G that become stucked in "Initializing Network" and don't let me in in setup mode to make a Factory Reset. Anyone knows if there's a hard-reset to this phone pressing some button? Something like we do on 79XX, that connects the phone and we press the # button. Best Regards. LM ... View more

Hi fellows, I've a Cisco SPA502G that become stucked in "Initializing Network" and don't let me in in setup mode to make a Factory Reset. Anyone knows if there's a hard-reset to this phone pressing some button? Something like we do on 79XX, that connects the phone and we press the # button. Best Regards. LM ... View more

I fellows, I've two sites, the branch with an ASA 5505 and on the corporate office i've an ASA 5510. I need to make a easy vpn tunnel between this to sites and I've made some configuration, but for now, the ikev1 isn't working. Anyone have tips to configure this? Thanks in advance. Best Regards, LM ... View more

I fellows, I've a customer that have a WLC 2100 and he like to connect iPhone's and Android's to is wireless system. Anyone knows if this is possible? What's the version that support this? Best regards, Luis Matos ... View more

Hi fellows, I've a solution implemented that contains 1 WCS and 3 WLC. For some unknown reason, started from some point, one of the WLC started to fail to connect by snmp to the WCS, given the next error " %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1037 Could not connect to LDAP server 2, reason: 49 (Invalid credentials)." I've made upgrade for the last version of firmware on all WLC's, have rewritten the credentials of SNMP, but the problem remains with only one of the WLC's, all others are working fine. The SNMP is v.3. The version of WCS is 6.0.132.0. Any ideias? Best regards, Luis Matos ... View more

Hi everyone, I've an UC560 with 4 FXS ports built-in. In 2 of the 4 ports of the UC, I've configured 2 stcapp phones. After  some time of use, these 2 ports became unavailable, so I've to make the  command "shut" and "no shut" to return to life these 2 ports. They  remain working during some amount of time and became unavailable again,  and the solution is the same, "shut" "no shut". Anyone have experienced this? Here's the configuration of the ports: voice-port 0/0/2 compand-type a-law cptone PT timeouts interdigit 20 timeouts ringing infinity station-id number 341 caller-id enable ! voice-port 0/0/3 compand-type a-law cptone PT timeouts interdigit 20 timeouts ringing infinity station-id number 350 caller-id enable dial-peer voice 3 pots corlist incoming internacional service stcapp clid network-number 341 port 0/0/2 ! dial-peer voice 4 pots corlist incoming interna service stcapp clid network-number 350 port 0/0/3 ephone-dn  41  dual-line number 341 corlist incoming internacional ! ! ephone-dn  50  dual-line number 350 corlist incoming interna Best Regards, LuisM ... View more