ckeithjones
Level 1
Level 1
Member since ‎06-05-2001
‎08-18-2017

User Statistics

  • 35 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
5 Discussion Posts
30 Discussion Posts
20 Discussion Posts
First Discussion
First Question
10 Discussion Posts
1 Reply
20 Replies
10 Replies
5 Replies

User Activity

I have a 2651 with a 4 port serial card. I cannot get any commands to work which might set the clock source. Is there another place in the IOS where I can set this?FEIDATAR#show hardCisco Internetwork Operating System SoftwareIOS (tm) C2600 Software ...
I  currently have an etherchannel configured between my Nexus and a NetApp device. I have two 4-port etherchannels that are set for LACP (mode active) that are working and 1 2-port configured exactly the same that won't work.             12    Po12(S...
I cannot get the AAA tacacs+ authentication to work on my Nexus 7000. The following is the logging error I get:2011 Dec  7 01:17:05 MCN-CORE-D-7020 %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication failed for user ctcrgrf from 172.26.32.200 - sshd[16930...
I am seeing high CPU usage on a Cat 4507. I have run the following:show logg Nov 16 14:08:27.154 UTC: %C4K_EBM-4-HOSTFLAPPING: Host 00:00:00:00:FE:01 in vlan 1 is flapping between port Gi5/10 and port Gi5/30Nov 16 14:08:42.150 UTC: %C4K_EBM-4-HOSTFLA...
I have a stable network that rarely has any routing changes. I would like any routing table updates to be sent to a logging server or possibly generate a trap so I am aware of the changes. Currently I use a Debug ip routing command and get the output...
Community Statistics
Member Since ‎06-05-2001 08:06 PM
Date Last Visited ‎08-18-2017 04:01 AM
Posts 35