Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'd like to use an SG200 swicth to allocate bandwidth on a 100 Mbps fiber Internet uplink.I will have 5 routers (each supporting a separate network) connected to the SG200, and I'd like to give each network 20 Mbps.I would greatly appreciate it if so...
I am having problems configuring multicast support on my PIX 515 (6.3(2)).I am trying support a Symantec Ghost Console on my Inside network, communicating with Ghost Clients on my DMZ network. Server: System = Windows 2000 Server, Domain memberIP = 1...
Hello Everyone:I am having problems correctly configuring my PIX to support the multicast traffic required by Symantec Ghost Console.My intended Symantec Ghost Console functionality: Ghost is used to manage/refresh Windows 2000 computers in Hotel Bus...
Hello,Bottom Line = We are experiencing VERY slow throughput, when going through a 2600, which is acting as a firewall between 2 networks.Basic configuration = Workstations on Network 1 are connected to the 2600 through a Catalyst 2950, on the Netwo...
I'd like to make sure that my copy of pdm-302.bin is correct before running the installation.I have an MD5 checksum of 1CE1A2C89912B4D6CC7DE984F5075697.Is this correct?Thanks to all,AGS
I have exactly the same problem. Other IPSEC VPN clients work OK, but the Contivity client usually doesn't -- although a few guests (we are a hotel) have connected using Contivity. This leads me to believe it's a client configuration issue. When I...
