Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So about a year ago I had to implement a back to back ISDN gateway. By this I mean that I needed to interface with a PBX solution that could only do ISDN and not SIP to the PSTN.
I had done something similar in the past where there was a CUCM and a...
Hi
Just thought I would upload the config I have been using for my SIPGATE account with CUBE. It took quite a while to get it working.
I use this in my LAB and it seems to work pretty well, I have done inbound and outbound calling and all seems good...
Hi
I have attached a trace for you, I have removed my specific deails
I called from 070..... and callled to 020..... and I have added a lots of eeeees to my username.
Gary
Hi
I will need to pull the logs from an active call but if you register the number using the following my CUBE accepted the call.
credentials number 02031231212 username 123456790ABC password 7 HASHOFPASSWORD realm
Gary
Hi
From a very quick view of the screenshots, I see that the first item has a 4 digit area code while the second has a longer (8 digit) callerID. If you are doing a lookup on that longer number then that will not match an area code if the area code i...
HiBased on a previous question I don't think this is possible.https://supportforums.cisco.com/discussion/12408581/uccx-finesse-over-http-instead-httpsGary
