Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
How can i enable SCP on a ASA 5555. Right now its not coming up as option?
All i am getting is the following options:
ASA/ADMIN-CONTEXT/act# copy run ? cluster: Copy to cluster: file system ftp: Copy to ftp: file syste...
Hi All,
I need to somehow create scheduled backups from a ASA 5585 running around 30 customer contexts.
the firewall needs to push the backups of the configuration to a backup server. preferably via SCP
i have looked at various options
1. EEM Scr...
Hi all, i have the following config on the 3560: interface GigabitEthernet0/44 no switchport ip vrf forwarding management ip address 10.77.195.2 255.255.255.128endinterface GigabitEthernet0/4ip vrf forwarding management no switchport no ip addressend...
Hi All, I have 3 C240 servers connected to a Nexus 5548. I want to configure FCoE across to them and i have configured the exact same configuration on 6 ports:vlan 10 fcoe vsan 10vsan database vsan 10device-alias mode enhanceddevice-alias database ...
Hi all, Im about to update a UCS environment from 1.3 to 2.2 and it seems to be supported as the following document exists: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/upgrading/from1-3/to2-0/b_UpgradingCiscoUCSFrom1-3To2-0.html Sha...
MarkMalone2008 taking the vrf off the 3945 would not have made a difference. Anyways i followed advice of Jon Marshall above and made the interfaces on gi0/4 and gi0/44 access vlan ports and moved the .2 config to a SVI.i can now ping across the swit...
Its ok guys, found the issue. On the C240s, under the 'inventory' then 'properties' than 'Cisco VIC adaptors' than 'vHBAs' you have to have boot enabled for it to flogi into the Nexus.
