Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,Due to our companies size and current public IP needs, it doesn't seem as though we can justify a BGP implementation. However, we have public facing services that require as much redundancy as possible. With that in mind, I'm trying to co...
I was wondering if someone could explain this to me:I have a 3845 router with several 2MFT-T1 interface cards and for some reason when I do a "sh controller t1 1/x/x" I see "Data in current interval (0 seconds elapsed)". Where as all other interfac...
What is the best method of creating a site to site VPN between an ASA 5510 and an 871 router where the 5510 has a static IP and the 871 has a dynamic IP?My ASA is currently running ASA software version 7.0(5) and I cannot find how to create a tunnel ...
Gautam,To answer your question, our internet facing links are public IPs, subnetted as /30, and are outside of our /27 block.I'm afraid I'm a bit more confused regarding the NAT configuration. You say configuring NAT in this way on the routers is no...
Thanks a million for the thorough reply Gautam! I'll try to touch on all of your points.1. We have seperate IP space from each provider. So no, each provider will not be forwarding the others' space, only their own. 1.1 This is a great point...
I found some documentation stating this as well, but I believe it is specific to routers.I also found this document: http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/25ew/configuration/guide/nfswitch.html#wp1014923 which explicitly stat...
Ahoy Phil,Have you had any success with this? I am experiencing the same issue on cat4000-i5k91s-mz.122-25.EWA14.bin.Would appreciate any insight, thanks!-Adam
I have experienced a similar issue that I believe is the result of this bug:http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl22198The only way I've found to resolve this issue is do a CFwdAll (Call f...
