Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,
I have a question and need your wise recommendation regarding the scenario.
Requirement: One of our customers has decided to have their own private dark fiber connection - ring topology. We as partners have to recommend and design their net...
Hi guys,
We have issue with the Core Switch C4506 utilization. It had increased recently and going till 75%. Based on the below commands, I see the following outputs. I have tried to unmanage device using SNMP and checked, still no help.
I know the ...
Dear,We have received the ISE NFR kit. With the kit, we have received the ISE-NFR Image, Services NFR Image and NFR Configuration Guide (comprising of dhcp.conf, ISE Config Guide, ISE NFR configs (ASA, Switch Config)).I went through the Configuration...
Thank you, both Chris and Joseph for your valuable input and suggestion regarding this!
Suggestion:3. Resilient Ethernet Protocol - REP for the Ring topology, can this be used? The consultant working with customer suggested this technology. I neve...
Hii Mark,Thanks for your reply, and I apologize for late reply.I have found that there were monitor sessions running on the Core Switch with VLANs as a source. This is for Call recording - and they are spanning voice vlans to record and present to re...
A little late to the party, but I have Cisco SIP 8851 phones working Hotdial.
I did all the configuration mentioned in the below link as per the SCCP phone.
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communicatio...