Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all, We have a site closure and need to migrate both controllers to another site. I am trying to get them all migrated to 10.10.150.6 from 10.10.150.5, but nothing is working. Our controllers are 2504 running 8.5.151.0 which are supporting se...
I have phones which won't register at all. They seem to be missing files, but I downloaded the CME 10.0 ZIP and TFTPd it to the router and phones have access to all 10 files that I will list below. This is a snip of the failures from the actual phone...
Hello all,I am having the hardest time with getting VPN clients access to ICMP into the internal network behind the FW. I have tested HTTP and SSH fine for inbound VPN client connections, but their pings fail always. They seem to hit their destinatio...
You will need to implement a control-plane 'Extended' ACL to block all SSH but to the MGMT Int. That way you don't need to apply the same ACL on all your interfaces. This ACL should also allow SNMP, SCP/FTP, ICMP, and whatever else you need for MGMT ...
I am also going from 3.xE to Cisco IOS XE Denali. I ran out of space also and tried deleting all the files I could with the 'software clean' but it wasn't enough as I still need another 400mB. Cisco TAC stated you can erase all .pkg for current versi...
Late response. You just need to remove the WCL's IP in TACACS/ISE then fix what's wrong then re-add it back to ISE. with it removed, the WLC will fail back to local creds while you fix. I am going through the same thing now and will begin looking at ...
I tried this, and there are still no logs in ACS. Probably would be if I SSHd into the non-admin context directly where the additional AAA config has been placed.
Looks like I figured this out. I waited 2 days till I asked for help, and right after I wrote this post, I figured it out in an hour. Seems like on CME v 10.0 only version 9.2.2 is supported. Our 8945 phones stated on the back of them that they need ...
