About jeffkushner

jeffkushner · 05-20-2020

Hi Wes, Here is a quick explanation, the mandatory data rates mean that the client has to connect at...

jeffkushner · 04-13-2020

Local APs are totally dependent on the controller for their functionality. Simply put, if the contro...

jeffkushner · 03-13-2020

mpasqualini, I did a TAC case and was basically told that this model AP really needs uPOE or the inj...

jeffkushner · 03-12-2020

What Cristian suggests, we tried and then did a TAC case. We were told it must be uPOE. When we conn...

jeffkushner · 03-05-2020

We have an enterprise environment with over 6300 APs. We are having the same issue with 2802 and 380...

jeffkushner · 01-06-2020

Have you used these devices for bridges at that kind of distance, approximately 1700 feet? I used to...

jeffkushner · 01-06-2020

That is why I was surprised myself. Yes that is on the 5Ghz. When I tested the same distance using t...

jeffkushner · 01-03-2020

I set up the 1562s with Mobility Express and set the power level to 1 and the antenna gain to 28. It...

jeffkushner · 01-03-2020

I have a point to multi point bridge currently being serviced by 1400 series bridges. I need to repl...

jeffkushner · 09-08-2017

Working with an older CUCM installation that uses SIP. One of the issues they have is they have a re...

jeffkushner · 07-18-2014

Hello Geevarghese,I am not familiar with this type of scripting. The CME is getting it's phone servi...

jeffkushner · 07-16-2014

Hello, I have a customer with Call Manager Express with a Cisco Unity Express module in it. The cust...

jeffkushner · 07-11-2014

Thank you very much, I appreciate the direction, I will give that a try.

jeffkushner · 07-10-2014

Thank you for the response Jaime.That is what TAC told me. I am not familiar with TCL scripting and ...

jeffkushner · 07-10-2014

I have a customer with a call manager express and a unity express. They have an 800 toll free number...

Re: Data Rates