Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,
I have Cisco 4948-10 G switch, and i have created 30 Vlans for my customers. now i want to rate limit the bandwidth on Vlan interfaces. can you please let me know how to do that ?
it is not allowing me to apply the rate-limit command l...
Hello Friends,
I have 2 Cisco routers both are 1941/K9 ISR, and 1 ASA 5505 BUN-K9 Firewall with unlimited client connections. also i have 2 different T1 ISP connections, 20 Mbps & 8 Mbps.
and my goal is to achieve VPN high availability while utiliz...
Hello Friends, I have 2 different ISP connections and 2 Cisco 1941 routers and 1 Cisco ASA 5505 firewall.... i want to load balance the traffic.Please let me know the best way to do so... Thanks,Sandy
Hello Friends,Situation:One of my FTP Server is configured with 2 NIC, as MS 2k8 Standard do not support clustering and my NIC also do not support NIC teaming so i am using DNS round robin for load balance.... and each NIC have a different private IP...
Hello Friends, I have 2 Cisco ASA5515 firewalls at head office, i have 2 ISP connections as well. and at my retail locations i have cisco C891 routers. my goal is to connect the both RETAIL location and HEAD OFFICE with each other over IPSec L2L VPN ...
Hello Sir,Thanks for the positive response, I want to rate limit the SVI. i have created 26 Vlans and interfaces. those SVI interfaces will be the gateway for my clients. so i want to assign the bandwidth. like 5 Mbps and 10 Mbps. according to the cu...
HI I did that but packets are drooping while user is consuming the bandwidth i have allotted... I configured 5Mbps up and down but when user is consuming given bandwidth the packets are droping even the gateway is also not reachable. RTO while pingin...
