Hi, I am facing issue with some WLAN clients roaming. In case they want to reassociate to different AP, client is dropping. I started debug at WLC, but there is nothing in WLC debug logs during roaming period.
I have pcap logs and I found that client...
Hi experts, by the beginning of the next year I am planning to install 1 dual-homed FEX N2K-C2348UPQ-10GE. FEX is going to be connected to pair of N5K-C5648Q nexus switches (running version 7.3(0)N1(1)) via 40Gbit interfaces.
Physical interconnection...
Hi, I would like to ask if it is normal behavior of the CAT6500 switch to have 2 same line cards with different power consumption. I experience this situation with line card WS-X6724-SFP.
Output of my HW configuration is as below:
Switch module H...
Hi Rich,
We performed simple test with CAT6500 chassis. We used chassis 6506-E with VS-SUP2T-10G supervisor and different combination of available line cards.
First test was performed with supervisor engine without line cards. You can see show power ...
HI Joseph, it does not make sense to me.
Why would line card with older HW version take less power? I assume new products should take less power, but you never know.
Ok, back to number of active ports. It is almost the same. Card seated in slot 2 h...
Hi Rich, thank you for fast reply.
I issued show module command and found out that both linecards have the same CFC as you can see below. Cards number 2 & 6.
Any other idea?
Mod Sub-Module Model Hw Status---- --------------------------- ---------...
